User-Friendly 2 Pack Band Saw Tire for Jet Powermatic 100025A PWBS14-119 14 Outstanding

Features:

These tires do not dry out; therefore, they will not crack, peel or harden like rubber tires do

They hold so tightly to the wheel you won't need to glue them down. Colored bright orange for easier inspection

Specifications:

Diameter: 14"

Width: 1"

Thick: 1/8"

Steps to Install:

Remove wheel from saw, this greatly eases installation of the tire.

Take old tire off wheel by prying it off with a flat bladed screwdriver, being careful not to damage wheel.

Wash and clean wheel thoroughly making sure that the face of the wheel where the new tire will fit is of any bumps or pitch built-up that could cause a high spot on the tire when installed.

Hook new tire in groove and use a wooden dowel to roll the tire onto the wheel.

Roll dowel around wheel under tire a couple of complete turns to equalize tension on tire.

Remove dowel being careful not to get fingers pinched when the tire snaps into groove.

Install wheel back on saw in same location as before.

Note:  keep tires clean with Bandsaw Blade Cleaner. This will improve tire life and also help your blades to last longer.