Optimized 100 Piece Screwdriver Tamperproof Torx Driver Torks Tool Bit Set Kit Tamper Proof Relaxed

Use them in your favorite power drill or hand driver and gain access to security type fastened screws.

Our 100 piece security bit set is a must for removing tamper proof fasteners. Many manufacturers use special tamper proof screws so that you are unable to repair their products or for security reasons.

Included in the kit is a very wide selection of bits including torx, spline, clutch (used a lot on older trucks from the 50's), tri-wing, square drive, spanner, metric & standard hex tamper proof, pozi-drive, slotted, phillips, torx tamper proof (with the hole in the middle), plus many more.

Save yourself a lot of time and money with this kit; the local hardware store will charge as much as ten dollars if they even have it for just one of these bits plus you'll know what size that you need but with our kit you will be able to match the bit right up to the fastener saving yourself a lot of time.

Included in the kit is:

One wing nut driver

One magnetic bit holder

One socket bit holder

One hex/square bit adapter

One hex/square bit adapter extension

One size 0 Phillips head bit

One size 1 Phillips head bit

5 Size 2 Phillips head bits

One size 3 Phillips head bit

One Posi-Drive head size 0

One Posi-Drive head size 1

5 Posi-Drive heads size 2

One Posi-Drive head size 3

4 Square bits sizes: 0, 1, 2 and 3

9 Flat head bits sizes: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7 and 8 mm

4 Spanner head bits sizes: 4, 6, 8 and 10

9 Torx head bits sizes: T8, T10, T15, T20, T25, T27, T30, T40 and T45

3 Clutch head bits sizes: 1, 2 and 3

3 Torq head bits sizes: M5, M6 and M8

3 Spline bits sizes: 6, 8, and 10

4 Tri-Wing bits sizes: 1, 2, 3 and 4

9 Tamper proof Torx head bits sizes: T8, T10, T15, T20, T25, T27, T30, T35 and T40

9 Hex head bits sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6 and 8 mm

10 Hex head bits sizes: 1/16", 5/64", 3/32", 7/64, 1/8", 9/64", 5/32", 3/16", 7/32" and 1/4"

6 Tamper proof hex head bits sizes: 2, 2.5, 3, 4, 5 and 6 mm

6 Tamper proof hex head bits sizes: 5/32", 9/64", 1/8", 7/64, 3/32" and 5/64"

Manufacturer details may vary and there may be substitutions.